CORE SENSOR-BAR
The most progressive bar in the World!
Three reasons why the new CORE SENSOR-BAR will redefine your kiteboarding:
1. The most direct bar feeling
The unique hollow Unibody construction reduces the weight by 43% whilst at the same time increasing the breaking load by 40%. The intelligent mass distribution and reduction of the mass moment of inertia (by 55%) enables a noticeably more direct feeling of the kite. In addition, the leveled bar ends reduce, through improved leverage, the bar steering force.
2. Revolutionary safety
The ergonomically designed revolutionary ROTOR quick-release enables an intuitive safety release with the least amount of effort. In contrast to traditional systems there is no power required against the flow of the water. At CORE the entire safety system, quick-release and the new leash, work together harmoniously. With this the SENSOR-BAR not only exceeds the highest standards, but also sets new levels in safety.
3. Unsurpassed comfort
CORE presents the only 100% self untwisting bar system. The mid-bar grip ability was optimised with a further development of the line guides and a noticeably thinner bar diameter. The low wear adjuster halves the trimming effort required with the new adjuster. The SENSOR-Bar is suitable for all kite sizes – one bar for all. The SENSOR stopper and pro leash are available for pro riders.
Superior Technology: THE BAR
The first hollow bar from one mould. Thanks to the unique Unibody construction, without overlapping connections, the weight of the SENSOR-Bar has reduced by 43% whilst at the same time increasing the breaking load. The trick with the improved kite feedback lies in the intelligent mass distribution and reducing the mass moment of inertia (by 55%) which enables a noticeably more direct feeling of the kite.
The leveled bar ends significantly reduce, through improved leverage, the bar steering force. The connecting pin, on the underside of the bar, is made from pure titanium (Ti) which further reduces wear when adjusting the depower lines. The hollow Unibody of the SENSOR-Bar is made from a newly developed high performance material, an innovation Made in Germany. The SENSOR-Bar has a 40% increased breaking load compared to its predecessor.
Comfortable ride
The mid-bar grip ability was optimised with a further development of the line guides. The successively ordered depower lines now take up no more than 4mm – ideal for the one-handed mid bar hold. And the best thing is that with the noticeably thinner bar diameter the bar feels as light in the hand as it really is. The new adjuster halves the trimming effort required. And lastly the SENSOR-Bar is suitable for all kite sizes.
The new adjuster system is an improvement against all currently available cleat systems. The reason for this: the forces working on the cleat adjuster are halved by adding an additional re-direction over a low-wear adjuster. This results in the system operating with less trimming effort and further allows a more accurate trim setting, even at the upper wind ranges. The 20% lower height of the ROTOR quick-release body improves access to the adjuster. The depower travel can now be adjusted with a simple adjustment of the trimming cleat.
The easy bar length adjustment, with the line attachments at the bar ends, allows the SENSOR-Bar to cover the entire Kite range, from 5 to 17m2, with one bar.
The ROTOR quick-release
The ergonomically designed ROTOR quick-release is absolute innovation. The bi-directional release mechanism enables an intuitive safety release with the least amount of effort. In contrast to traditional systems there is no power required against the flow of the water. At CORE the entire safety system, quick-release and the new leash, work together harmoniously. With this the SENSOR-Bar not only more than meets the highest standards, but also sets new levels in safety.
The laterally fitting Chicken stick avoids the accidental unhooking from the harness hook. With unhooked maneuvers it glides to the side to ensure that it is not in the way when hooking in again.
When closed the quick-release prevents sand from entering the spring mechanism. Should sand enter the ROTOR quick-release body, the transparent material ensures that it is easily detected and can then be rinsed out. The construction is simpler than ever.
Unique 100% self untwisting bar system
Tried and tested, optimised and unique. From the beginning it has been the cornerstone for the unsurpassed comfort at CORE: the self untwisting bar system. The twisting and turning of lines after rotation has always been transferred, by CORE, to below the bar. Pulling down on the bar automatically orders all the lines.
Ultra-light Unibody
50% reduced trimming effort with the new adjuster system
More direct kite feeling by reducing the mass moment of inertia by 55%
Optimum grip ability with reduced bar diameter
12% improved leverage with the leveled bar ends
Perfected line guides at 4mm for the ideal grip
Only 240g with a 43% weight reduction
Revolutionary safety with the 360˚ ROTOR-Quickrelease
100% self untwisting
The Safety Leash
The safety leash release is visible at the front of the harness for a quick and intuitive release. This guarantees an unbeatable level of safety. Only the CORE-Leash-System guarantees the highest level of safety. The configuration of leash components and the individual components used prevent the safety leash from being jammed against the harness – especially after release of the quick-release. At CORE the entire safety system, quick-release and the new leash, work together harmoniously.
Lines made in Germany
All the SENSOR-Bar lines come from the German manufacturer LIROS to ensure a high standard of quality. Working together with the leading sailing manufacturer of high performance ropes underlines our requirements. After assembly, the entire line length from the chicken loop, over the depower lines up to the end of the front flight lines are pre-stretched with 200kg. The SENSOR-Bar achieves an additional stiffening of the power lines by splitting the force onto the, depower line integrated, safety line.
The spliced line ends are unique. They are no longer sewn in parallel and as a result their rigidity is increased by 20%. A positive side effect of this is that the laying out of the lines is noticeable easier and faster.
PRO Features
CORE has not only made the SENSOR-BAR more direct, safer and more comfortable, but has also equipped it with features that will appeal to the Pros. The Suicide mode allows the experienced rider to practice unhooked tricks, without the kite completely depowering after releasing the bar. The safety ring, to which the leash is attached, is simply attached to the chicken loop. The safety of the ROTOR-function is 100% unaffected. The Pro can acquire the following additional attachments:
PRO LEASH
Possibly the only Pro Leash on the Market which cannot be jammed behind the harness.
PRO STOPPER
For temporarily locking the bar position whilst riding and especially during high jumps with long flight times. The stopper is released by actively pushing the bar up.
PRO LOOP
Longer chickenloop for Pros that perform a lot of unhooked moves and want to hook in quickly – the path to the adjuster is however lengthened.
No comments:
Post a Comment